Motorola GM-360 pinout

I found this somewhere

Motorola GM pinout

1)  speaker -

2)  external mic

3)  digital in 1 (ext.PTT use external mic/data PTT use flat Tx audio)

4)  digital out 2 (external alarm)

5)  flat Tx audio, sensitivity 150mV rms to 60% deviation

6)  digital in 3

7)  ground

8) digital in/out 4

9)  digital in 5 with wakeup (emergency)

10) digital in 6 with wakeup (ignition)

11) flat/filtered Rx audio

12) digital in/out 7

13) switched battery voltage (max.1A,dropout voltage max. 1V)

14) digital in/out8

15) RSSI (radio signal strength indicator)

16) speaker +

17) BUS + (used for CFPS and Flash)

18) BOOT control

19) reserved

20) reserved

and position of pins goes: upper pins from left to right: 20,2 4,6,8,10,12,14,16,18

                                  bottom  pins from left to right : 19,1,3,5,7,9,11,13,15,17,